How to fight the wind when camping outdoors?

Oct 03, 2025 Leave a message

1. How to set up a tent in the wind?

When you encounter continuous strong winds in the mountains during mountain climbing, especially when you are suffering from hypothermia and getting lost at night and must set up camp immediately, you have no choice but to set up a tent in the wind. The difficulty is proportional to the wind force, and it is even worse without help.

However, there are corresponding techniques for both "internal account building" and "external account building" designs. "Internal account building" refers to the connection of the account rod to the inner account, and then the outer account is put on the outside; "external account building" refers to the connection of the rod to the outer account, which is at the outermost layer, also known as the "outer skeleton tent".

(1) Before setting up the tent, ensure nothing will be blown away.

Many hikers tend to store the outer and inner tents, ground stakes, poles, and other items in storage bags before setting up. However, in strong winds, these items can easily be blown away. Therefore, it's best to complete these tasks inside your backpack or secure them with heavy objects. Additionally, keep the lighter items like the ground stake bag and pole bag in your backpack, especially the ground stakes, which should be placed in a pocket for easy access.

(2) When setting up a tent in a windless campsite, you don't need to worry about the wind direction.

However, when there is wind, it's best to position the tent with its smaller force-bearing side facing the wind, such as the rear of a tunnel tent. This not only enhances wind resistance but also makes it easier for you to cook in the hall downwind.

(3) Fix at any time

When setting up a tent in strong wind, nails should be hammered at any time. For the "inner tent building" type of tent, the operation method is:

① Stand on the upwind, unfold the ground with the wind, and fix the four corners one by one with nails;

② Unroll the tent, put the two belt rings at the end of the tent on the ground nail just tied, and then insert the tent pole into the plug at the end of the tent;

③ Go to the head of the inner account and repeat the previous action;

④ Set up an external account and use wind ropes and ground nails for fixation.

In most cases, the "external account building" tent is connected to the inner and outer accounts, and the following operations can be performed:

① Hang the wind rope at the tail of the tent on the waist belt of the backpack and fasten it, or tie it to a solid object such as a stone, and fix it once;

② Use nails to fix the ends of the account;

③ Unfasten the wind rope at the end of the tent from the backpack belt and secure it with a nail

④ Wear a cane;

⑤ Pull the tent rope at the entrance hall, pull up the tent and fix it with nails.

 

2. How to make the tent more stable?

The continuous strong wind is more of a test of the strength of the tent. Often, when mountain friends set up camp, the wind is calm, but suddenly it starts to blow in the middle of the night. If the tent is not stable, the light ones will shake back and forth and make noise, affecting sleep; the heavy ones will collapse, causing damage and danger.

The stability of the tent is on the one hand to keep the fabric and wind rope in a taut state. The fuller the tent, the smaller the "contact surface" between the tent and the wind; on the other hand, it is necessary to find ways to weaken the wind force. The trick includes:

(1) The ground nail is inclined at 45 degrees

The ground nail is fully inserted into the ground and tilted about 45 degrees away from the tent to be most stressed. If you can't insert the ground nail completely, make sure that the connection point between the windbreak rope and the ground nail is flush with the ground so that it doesn't act as a lever.

(2) Add additional ground anchors

When the tent is constantly swaying in strong winds, it can continuously exert tension on the ground anchors, potentially causing them to be pulled out of the ground by the wind rope. To enhance stability, you can install an additional ground anchor behind the existing one and use a spare wind rope to apply a counterforce to the front ground anchor in the opposite direction.

(3) Add a wind rope

You can add a wind rope to the existing hanging point of your tent. When both ropes are taut and angled, they will enhance the tent's wind resistance. Wind rope perpendicular to the tent -- Position the wind rope at about a 90-degree angle to the tent fabric to maximize the tent's height and fullness. To achieve this, you can tie the wind rope to a high branch nearby or a ground stake or rock, and use an inverted trekking pole to support it.

Wind rope around twice / tie a knot first, then hang on the ground nail -- When it comes to connecting the wind rope to the ground nail, most mountain climbers simply pull the wind rope tight and hang it directly on the ground nail. A more secure method is to hang it first, then wind around once, or tie a knot first, then hang it on the ground nail.

Tighten the wind rope/wrap strap adjustment buckle -- After the tent is set up, check the wrap strap adjustment buckle at the four corners of the tent. It connects the inner and outer tents. Tighten the adjustment buckle to tighten the four corners. The tent will be fuller and the force will be more uniform.

In addition, in addition to not being pulled tight when building, continuous wind force will also make the wind rope loose, resulting in the tent not being in a taut state. You only need to adjust the wind rope slider upward in time and tighten it.

(4) Snow: Use ground anchors or snow anchors

If you are camping in the snow and there is strong wind, it can be difficult to secure the ground anchors firmly. In this case, wrap the wind rope around the middle of the ground anchor or stick, bury it in the snow, and then compact the snow without wetting it, as wet snow can freeze the anchor into ice, making it impossible to retrieve the next day. Alternatively, fill a bag with snow, tie it to the wind rope, and bury it in the snow pit for additional stability.

These are all about "strengthening the tent," but you can also do it by "weakening the wind."

Build stone walls or snow walls -- If possible, build stone walls around the tent, especially on the windward side. If it's a snowy ground, pile up snow walls, about several dozen centimeters high, and keep them at a distance from the tent. When the wind blows, these walls can intercept the wind blowing towards the bottom of the tent or direct it upwards, thereby significantly reducing the wind's impact on the tent.

Of course, if you have natural rocks, shrubs and other cover, you have a natural haven from the wind, without having to build stone walls or snow walls.

Spending the night in a strong wind is not the end of the perfect ending, and if it's still windy when you leave camp, you need to stay alert.

 

3. How to put up a tent in the wind?

When there is no wind, we usually first remove all kinds of supplies and backpacks from the tent, and then start to pull out the nails, and then put away the outer tent, tent pole, inner tent and ground step. But when there is a strong wind to put away the tent, you need to make some adjustments to avoid the equipment being blown away by the wind.

For the 'internal tent setup' (where the tent poles are connected to the inner tent, and the outer tent is placed over it), you usually need to remove the outer tent to set up the poles and the inner tent. However, once the outer tent is removed, the wind rope loses its function, making the tent more likely to be blown away by strong winds. Therefore, it's best to pack your bags inside the tent first, then press the backpack into the tent until you need to set up the inner tent.

First, the pole -- It is easier to dismantle the "tent built with outer tent" (the pole is connected to the outer tent and is at the outermost layer) in strong wind, because the pole is at the outermost layer, so the pole can be pulled out and put away first. At this time, the tent fabric part is still connected to the ground nail by the wind rope, which makes it difficult to be blown away.

Then remove the rope from the peg, put away the tent, and finally pull out the peg.