Winter outdoor cotton tents for disaster medical treatment
1 Purpose
Mainly used for setting up barracks and tents under field conditions.
2 Main Performance Introduction
2.1 The Winter outdoor cotton tents for disaster medical treatment is a double slope frame structure, with one door, two windows, two warm air vents, and one chimney on each side of the mountain wall. There are two windows on each side of the fence, and two slanted skylights on the top of the tent. The tent is equipped with an outer canopy and an inner liner. The overall view of the unfolded state is shown in Figure 1. Tent length: 5.48m, width: 5.48m, eave height: 2.13m, ridge height: 3.5m. The total weight of the tent is kg, and the total packaging volume is m3.
2.2 The tent frame is made of 45 × 45 × 1.5 welded steel pipes. Connected with plugs and fasteners for easy installation. The outer canopy material is made of 28 × 2/28 × 2 polyester grass green waterproof canvas, the main canopy fabric is made of 420g/m2 PVC, and the inner layer is made of 150D × 150D flame-retardant cowhide cloth. Lightweight, mold resistant, and moth proof. The normal service life can reach more than three years.
4 Installation methods and steps
4.1 Opening the packaging
Count the quantity of other components, verify their accuracy, and proceed with installation and installation.
4.2 Select terrain
Choose a flat, concealed, sheltered, and sunny place to set up a Winter outdoor cotton tents for disaster medical treatment, and if the site is uneven, it should be leveled appropriately.
4.3 Installation
4.3.1 First, spread out the three top frames and place them on the pre erected site.
4.3.2 Lift up the top frame and fasten the fasteners on the purlins into the clips of the top frame ridge plate. The schematic diagram of the top frame deployment is shown in Figure 2. Firstly, unfold the inner liner, find the top straps and tie them inside the canopy frame in sequence. Then, unfold the main canopy and place it on the canopy frame, tie the internal straps, and shine the outer canopy on top.
4.3.3 Each person holds a fence pillar in their right hand, listens to the command, and uses their left hand to simultaneously lift the inclined beam of the top frame. Quickly insert the pillar into the plug sleeve of the ridge point of the top frame. At this point, the tent frame is basically standing up. Afterwards, insert the door pillar into the crossbeam hole. Then insert the door pull rods into the door pillar latch plates separately. Install walls and mountain fence poles. Adjust the tent and fasten the internal straps
Hot Tags: winter outdoor cotton tents for disaster medical treatment, China winter outdoor cotton tents for disaster medical treatment manufacturers, suppliers, factory
