1. What are the methods of building a military single-soldier tent?
(1) Spread the tent on the ground, with the bottom side down, and smooth out the wrinkles.
(2) Take out the bracket; the tent is supported by a cross bracket. The bracket can be folded and connected.
(3) The tent has a slot for the insertion of the bracket at the cross position. Insert the bracket into the tent through this slot.
(4) Then, clamp the bracket to the first hole in the strap at each corner of the tent. Once the four brackets are up, the tent is formed.
(5) Add another hole on the four corners of the belt and fix it to the ground with a plug-in buckle.
(6) The top of the tent should be fixed with a rope at the cross position to make it secure. Especially in windy and rainy weather, it is not easy to be blown away or blown down.
2. Construction of military tents
(1) Take out the universal rod and connect it with the rope to form three sets of A-frame structures.
(2) Use the universal pole to form the frame. When the basic frame is connected with the V-shaped structure, take out the tent cloth and put it on the frame.
(3) After the frame is formed, the pole is supported from inside, and then the other parts of the bracket are filled and installed, which will make the tent more solid.
(4) In this way, the tent is set up, but we must use ropes to tie the tent firmly to the surrounding poles, and then fill the soil around the bottom of the tent to enhance the tightness of the tent and prevent things from entering the tent.
3. How to install and build military tents:
(1) Lay out the tent, take out the frame, connect the frame, and put the frame into the tent.
(2) After wearing it, fix the bracket to the ground to form a cross. The middle is the intersection point, and all four directions should be fixed.
(3) There are round buttons on the top of the tent, which should be fastened. After the tent is put on, the middle part should be fixed with a bracket, and the ropes on both sides should also be fixed below.
(4) Connect the main line of the fixed tent about one meter away from the tent.
4. How to install and build a military tent
(1) Before setting up the tent, we should first read the instructions of the tent carefully to understand the basic structure and materials of the tent, to set up the tent in an orderly way.
(2) Then take out the universal rod and the rope attached to it and connect them into three sets of A-frame structures, as shown in the figure.
(3) Then use the universal rod to form the frame. When the basic frame is connected with the herringbone structure, take out the tent cloth and put it on the frame.
(4) After the frame is formed, the pole is supported from inside, and then the other parts of the bracket are filled and installed, which will make the tent more solid.
(5) In this way, the tent is set up, but we must use ropes to tie the tent firmly to the surrounding poles, and then fill the soil around the bottom of the tent to enhance the tightness of the tent and prevent things from entering the tent.
5. What are the requirements for installation and construction?
(1) Before setting up a military tent, the terrain must be carefully surveyed, and there should be no rolling stones, logs or weathered rocks above the camp;
(2) Do not build military tents near the riverbank and on the dry riverbed during the rainy season;
(3) To prevent lightning strikes, please do not build military tents on the top of the mountain or in the open field;
(4) When installed on muddy or sandy ground, drainage ditches can be dug around the military tent to ensure that the ground inside the tent is dry;
(5) If you need to cook in the military tent, be sure to keep the flame away from the tent or isolate the flame with a fireproof board. Do not leave the tent when cooking, make a fire extinguishing plan in time, and install an exhaust fan to remove smoke and oil;
(6) When the local wind exceeds level 8, please remove the military tent in advance. Knowledge of the maintenance of military tents;
(7) Before storing the cotton tent, it is necessary to dry the tarpaulin, and then fold and store it after drying. If there is no time to cool the tarpaulin, do not store it for a long time, so as not to cause discoloration and mildew;
(8) According to the local humidity and climate conditions, the tarpaulin should be dried regularly to avoid bacterial growth and damage to the rainproof coating of the military tent.
