Tent installation and construction methods and usage precautions

Tent installation and construction method:
1. Take out the universal pole and connect it with the rope to form three sets of herringbone structures.
2. Using universal poles to form a frame, once the basic frame is connected to the herringbone structure, take out the tent fabric and place it on the frame.
3. After the frame is formed, support the poles from the inside and then fill and install the brackets in other parts, which will make the tent more sturdy.
Tent usage precautions:
1. Before setting up a tent, it is necessary to carefully survey the terrain and ensure that there are no rolling stones, rolling trees, or weathered rocks above the campsite.
2. During the rainy season, do not set up tents near riverbanks or on dry riverbed.
3. To prevent lightning strikes, do not set up tents on mountaintops or open fields.
4. When installing on mud or sand, drainage ditches can be dug around the tent to ensure the dryness of the ground inside.
5. If cooking inside a tent, be sure to keep the flames away from the tarpaulin or use fire-resistant boards to isolate the flames. During cooking, people should not leave the tent, and a fire extinguishing plan should be prepared in advance. Exhaust fans should be installed to eliminate oil fumes.
6. Please remove the tent in advance when the local wind exceeds level eight or higher.
7. Before storing cotton tents, it is necessary to air dry the tarpaulin and fold it for storage. If it is not possible to cool down the tarpaulin in time, remember not to store it for a long time to avoid discoloration and mold.
8. Depending on the local humidity and climate conditions, regularly air dry the tarpaulin to prevent the growth of bacteria and damage to the rainproof coating of the tent.