40 man big military tent for camping
1 Purpose
Building barracks and command posts under field conditions.
2 Main technical performance and characteristics
The 40 man big military tent for camping adopts a metal frame double-sided slope structure, which can be safely used under its own weight and 8 level wind force. The overall unfolded state of the tent is shown in Figure 1, and the overall unfolded state of the frame is shown in Figure 1.
The tent is 20m long, 5m wide, with a wall eave height of 1.8m and a ridge top height of 2.4m and 2.7m respectively. The usable area is 100㎡
The tent frame is made of 30x30x1.5, 25x25x1.2 thin-walled welded steel pipes. Connected with plugs and buckles, easy to install. The tarpaulin material is made of polyester waterproof canvas, and the outer canopy is made of 650g/㎡ double-sided PVC coated cloth, which is anti mold and anti moth. Under normal circumstances, it can be used continuously for more than 3 years.
Assembly time: About 30 minutes/20 people can complete the setup.
3.How to set up
3.1 Opening the packaging
Count the quantity of other components, verify their accuracy, and proceed with installation and installation.
34.2 Select terrain
Choose a flat, concealed, sheltered, and sunny place to set up a tent, and if the site is uneven, it should be leveled appropriately.
3.3 Installation
3.3.1 First, spread the 11 top frames and place them on the pre erected site.
3.3.2 Lift up the top frame, fasten the nails on the purlins to the clips on the ridge plate of the top frame, install X-shaped tension bars in various spaces on the slope, adjust the tightness evenly and moderately, and adjust the bending hook of the movable adjustment screw downwards.
34.3.3 Then unfold the canopy and place it on the canopy frame, install the crossbeam on the top, and cover the outer canopy on top.
3.3.4 Each person holds a fence pillar in their right hand, listens to the command, and uses their left hand to simultaneously lift the inclined beam of the top frame. Quickly insert the pillar into the plug sleeve of the ridge point of the top frame. At this point, the tent frame is basically standing up. Install fence crossbars, gable door posts, and gable crossbars.
3.3.5 Drive the ground stake into the ground at the appropriate position corresponding to the triangular ring on the top of the canopy, put on the tension rope and tighten it appropriately. The angle between the rope and the ground should be maintained between 45 ° and 60 °.
3.3.6 Soil compaction and construction of drainage ditches. The bottom edge of the tent should be buried and compacted with soil to prevent air from entering. For long-term use, drainage ditches should also be repaired. At this point, all the tents have been set up.
Hot Tags: 40 man big military tent for camping, China 40 man big military tent for camping manufacturers, suppliers, factory
